• Easton Spare Super Uni Bushings type Super Nock for Carbon Triumph Shafts (each) : EP26Nock BushesEP26
  • Easton Spare Super Uni Bushings type Super Nock for Carbon Triumph Shafts (each) : EP26Nock BushesEP26

Easton Spare Super Uni Bushings type Super Nock for Carbon Triumph Shafts (each) : EP26

The Bush that inserts into Triumph shafts to take Super Nocks and 3D Super Nocks

Easton Triumph Technical Details

  • Multi layer all carbon shaft with internal alloy armour for extra durability and FOC balance
  • Straightness: .002
  • Weight tolerance: 1 grain
  • Four spine sizes all at World Archery maximum allowed 9.3mm outside diameter
  • Spines: 350, 400, 450, 500
  • Pin nock adapter sold separately
  • Points fit all shaft sizes, sold separately, available weights: 100, 125, 150, 175 and 200 grains
  • Weights grains per inch: 350/9.25, 400/8.8, 450/8.5, 500/8.2
  • Important Information: Note: Triumph shafts are precision-cut and squared at the front for optimal point alignment and fit, and should only be cut from the rear before nock system installation and assembly. Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets. This will void warranty.
  • Cutting Instructions: Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated by the printed gold band. DO NOT cut the end with the aluminum armor core.
  • Point installation: Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters

For more information have a look at Easton Website

Write a review

Please login or register to review

Easton Spare Super Uni Bushings type Super Nock for Carbon Triumph Shafts (each) : EP26

  • Manufacturer: Easton
  • Product Code: EP26
  • £0.85


Available Options


Related Products

Easton One piece Insert point for Carbon Triumph (each) : EP85

Easton One piece Insert point for Carbon Triumph (each) : EP85

Easton One Piece Bullet Points for Triumph Shafts Bullet points for Carbon Triumph Easton..

£1.25 Ex VAT £1.04

Easton Nock Pin For Triumph Shafts sizes 350-500 (each) : EN20

Easton Nock Pin For Triumph Shafts sizes 350-500 (each) : EN20

Pin Adaptor for Pin Nocks Each. Easton Triumph Technical Details Multi layer all carbon shaft..

£0.90 Ex VAT £0.75

Easton Spare G 1206 Bushings type for Carbon Triumph Shafts (each) : EP25

Easton Spare G 1206 Bushings type for Carbon Triumph Shafts (each) : EP25

The Bush that inserts into Triumph shafts to take G Nocks Easton Triumph Technical Details..

£0.85 Ex VAT £0.71